14.1 Create a network Topology Setup in such a way so that System A can ping to two Systems System B and System C but both these systems should not be pinging each other without using any security rule e. g firewall etc.

steps :

First We See The IP Of All Our O.S

IP OF SYSTEM A IS 192.168.56.108

IP OF SYSTEM B IS 192.168.56.109

IP OF SYSTEM C IS 192.168.56.110

System A can ping to system B and system C .

System B can ping to System A and System C .

System C can ping to System A and System B .

Now we create a rule in routing table rule in such a way that from system A we can ping to both system B and system C . but from system B to C or C to A we can’t able to ping .

we can add rule in the routing table of system B to reject or to deny create packet for system A .

we can able to ping to system A but we not able to ping system A .

This same we add in the System C also that we can able to ping to A system but Not to B .

we can successfully create a setup in which we can ping .

From System A to B and A to C

But not ping from B to C .

THANKS FOR READING .